Just received my monitors today. Here is my feedback after installation.
1.Inconvenience during the whole installation process regarding the sensor & receiver. How much time does it cost you to install the whole set? (from opening the box to having app readings) Installation sequence: did you power up the receiver first or go straight ahead with installation of the sensors?
It wasn't really hard to install the devices. Only about five minutes. I installed the sensors first, then plugged in the receiver in the back of my car, as I don't yet have USB extensions for my smart car charger (the port is against the floor). First, the left rear tire connected, then the front left. The other two didn't connect yet, but I only had it on for about five minutes (I'm running low on fuel, so I didn't want it powered on too long).
2.Any problems with the APP? Do the readings of the air pressure of the 4 tires shown almost immediately after the installation is completed? Does any of the tire readings fail to show more than 1 min? Does the problem sensor finally get readings after some remedies?
I haven't been able to log into the updated version of the app. It keeps saying "connection failed" underneath the password field. I don't know if it has to do with my connection or a connection to the server, but it won't let me log in.
3.Any misunderstanding/ unclear words & phrases you discovered with the User Manual.
I didn't misunderstand anything in the user manual. It was very clear. Although, there is one thing that you may want to consider adding. You may want to add that the security device is optional in the instructions, as well as the optional page. Though, I also would add how the security device secures the devices.
4.Any specific points that please you.
I do like how the device looks like a car, and that if there isn't a problem, the lights are green. I do wish how if the devices are still connecting it would blink white or green, or if there is a problem, the light would turn red. I don't know if this is the case, as I have yet to connect the device to my phone.
Also, just a little thing, but if all the tires are fine, those three dots and the USB port should also turn green. If there is any problem, they should turn back to white. But if everything is okay, it should show it.
The following are photos of my installation. They are screenshots of my phone when I was recording video (I plan to publish an unboxing and installation video on YouTube. If you want me to hold off until a certain date, please let me know soon).
One more thing I would like to add. The sensors themselves were jostling around inside the box while in transit, and weren't in their spots when I opened the box. Maybe add something to hold them down?